روش های آموزش علوم و فناوری مهندسی با نگاهی بر تجربیات کشورهای صنعتی
محورهای موضوعی : عمومىفیروز بختیاری نژاد 1 , ناهید شیخان 2
1 - دانشکده مهندسی مکانیک دانشگاه امیرکبیر و دانشگاه مریلند
2 - دانشگاه صنعتی امیرکبیر
کلید واژه: مهندسی , آموزش مهندسی, توسعه علمی, توسعه فناوری,
چکیده مقاله :
رشته های حوزه فنی و مهندسی به دلیل رابطه متقابلی که با فناوری و توسعه علمی دارند از اهمیت بسزایی در اقتصاد دانش بنیان برخوردارند. ،. در طول چند دهه اخیر روند اصلی آموزش مهندسی در کشورهای صنعتی مرتباً تغییر کرده است و به دو گرایش علوم مهندسی و فناوری مهندسی متمایل شده است. گرایش فناوری مهندسی برای نیازهای فوری و مستقیم صنعتی است و گرایش علوم مهندسی برای تدوین روشها و استانداردها در طراحی از طریق مدل سازی و تجزیه تحلیل و کسب توانایی های پایه برای ورود به تحصیلات تکمیلی برای تولید علم و نوآوری می باشد. با توجه به اینکه توسعه علمی عمدتاً توسط دانشجویان دکتری با انجام تحقیقات توسعه ای در حوزه فنی و مهندسی انجام می شود و توسعه فناوری توسط دانشجویان ارشد و مراکز تحقیقاتی در تحقیقات کاربردی محقق می گردد، لذا در این مقاله نتیجه مطالعات در باب آموزش علوم و فناوری مهندسی با نگاهی بر تجربیات کشورهای صنعتی ارائه می شود و پیشنهاداتی جهت بهبود روش های آموزش مهندسی در یک رشته مهندسی ارائه می گردد.
The fields of engineering and technical possess the great importance in the knowledge-based economy due to the interaction they have with technology and scientific development. Over the last few decades, the main trend of engineering education in industrialized countries have been constantly changing, and they tend to be biased toward engineering science and engineering technology. The engineering technology is for immediate and direct industrial needs, and the engineering sciences is to formulate methods and standards in design through modeling and analysis, and the acquisition of basic abilities for entry into graduate education for the production of science and innovation. Considering that scientific development is mainly carried out by PhD students by carrying out developmental research in the field of engineering and technical, and the development of technology is realized by senior students and research centers in applied research; therefore, in this paper, the results of studies on the teaching of science and engineering are presented with a look at the experiences of the industrialized countries and the suggestions for improving the methods of engineering education especially mechanical engineering are presented too.